Remedy / Process / Systembindning
2015
2015
Det här paketet är utgånget/uppdaterat.
Sök efter ett ersättande paket i menyn till vänster.
MER INFORMATION
Liquid Force RemedyHarley Clifford continues to push his boat riding further than anyone and this year he wanted a new board that could take him higher while responding quicker to his every move. The new REMEDY, with its increased rocker angle and Venturi hull, was designed to launch him, as well as you, more efficiently into a high and fast trajectory off any wake. With its fuller ends and its unique “split-tip” shape, you will feel the added lift off the wake, increased control and board feel. The REMEDY’S thinner profile gives you a quicker turning board that provides great hold and positive edging. Finished off with a bottom skin that gives it reduced weight and a superior, slick, durable surface, the REMEDY is a modern day boat riding rocket ship! |
|
Aggressive Three Stage Rocker Increased rocker exit angle for the highest arc off the wake Triple Concave inside Single flows into Venturi Quad Channels Center section gives you the softest landings with no loss of speed loss or flow...Venturi effect into tip channels keeps board moving fast with positive grip “Split-Tip” Shape Increased control and board feel Thin profile low volume rails Gives a deeper bite into the water for faster, more sensitive edging Pro-Glass Combo Layup Special combination glass layup offers increased flexural strength Bladed RX Quad Fin Setup |
|
Process BootNICK DAVIES SIGNATURE MODELNick Davies har en helt ny bräda och en helt ny Process boot. Med uppdaterade färger och traditionell snörning är det en riktig skönhet. Processen har ett högt stövelskaft och har 4/5 på Hyperlites egna flex skala. Det unika Hyperliner materialet blir formbart vid upphettning. Värm skon och stoppa i foten och dra åt. När skon svalnat har du en formgjuten innesko efter just din fot. Andra smarta material är till exempel Ultron som är både stötabsorberande och anti-mikrobiellt vilket hindrar bakterier och mögel att växa i skon. Hyperlite skriver How could the king of cable not have his own System boot? Great question, that's why Hyperlite and Nick Davies are excited to give you the Process boot. This new boot features a design that is great for the cable or behind the boat. Mr. Davies was looking for some added support so the Process boot utilizes a taller, more supportive cuff and removable power strap to accomplish this. Solid heel hold was also an important part of the design, and the 2 to 1 lacing zone allows for added retention as the laces are tightened, pulling a rider's heel snugger into place. Just like our other System boots, the Process features a fully heat moldable Hyper-liner for the ultimate in customizable comfort, Ultron insoles for added impact protection and a full EVA-Lite outsole for a lightweight feel. *Remember the Process boot is designed to work exclusively with our System Binding. Both components are needed for use. CONSTRUCTION FEATURES All New 2-Part Construction Fully Lasted Fit 2 to 1 Lacing Zone EVA-Lite Outsole EVA Impact Heel Inserts Removable Power Strap Memory Foam Ultron Insoles Heat Moldable Hyper-Liner Flow Through Drain Panels Taller More Supportive Cuff  |
The System BindingThe System has been completely redesigned this season, taking an already revolutionary product and making it even better. This new binding design centers around three new features. Beginning with our exclusive G6 Polycarbonate chassis that is lighter than previous generations, while still providing superior board control and support. The improved chassis interfaces with our exclusive Urethane Highback for maximum mobility and response. New Auto Centering Stability Plates allow a rider to set their bindings up for the correct size boots in minutes. The plates are removable and can be replaced, ensuring a solid connection even after seasons of wear and tear. This new System is the ultimate in high performance wake footwear for boat and cable riders alike.CONSTRUCTION FEATURES Baseless Interface Ultra Light G6 Polycarbonate Chassis Urethane Highback Auto Centering Stability Plates Articulating Highback Flexion Ankle Strap Tool-less Hardware Adjustable Toe-Strap Aluminum Mounting System |
 |
